Rockler Chamfer Reversible Rail Stile Bit

Rockler Ogee Reversible Rail & Stile Bit Dimensions
	Use this cutter to make square edge or arch pattern doors without a fence. One bit cuts both the rail and stile profiles; simply remove the heads and reverse the positions.

Rockler#	A	B	C	D	E	Bearing
27190	1-5/8"	15/16"	1/2"	1-1/2"	3/8"	22mm

A fantastic value on high quality router bits. These bits are competitively priced while offering high performance and long life.

Quality performance features include:

K10 and K20 grade carbide for clean cutting action.
Final sharpening with 600 - 800 grit diamond wheels.
Precision balanced for smooth operation.
Baked-on anti-stick coating to reduce pitch and resin buildup.

Router Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.

1) Rockler recommends using 1/2" shank router bits whenever possible. 1/2" shanks provide better stability with less vibration to produce a smoother cut and longer cutter life.
2) Make multiple light passes rather than one heavy cut.
3) Install your router bit so that 90% of the shank is inside the collet. Here's a rule of thumb: fully insert the bit, then pull it back 1/16 to 1/8 of an inch.
4) Use a router table whenever possible.
5) When using large diameter bits, reduce the RPM of your router. Then test your set-up on scrap lumber.
6) Always follow your router manufacturer's recommendations.

Rockler Chamfer Reversible Rail & Stile Bit