Magnetic Window and Door Contact

This protective device monitors the opening and closure of doors and windows. Each magnetic contact features a connection for a hardwired sensor input, making it ideal for protecting multiple windows using standard contacts and only one wireless version. Enabled with a unique ID code, each magnetic door and window contact is available in several optional frequencies in compliance with international standards.

Specifications
Manufacturer:	Visonic
Manufacturer Product No.:	MCT-302
Dimensions:	3 3/16" x 7/8" x 15/16" (81mm x 22mm x 23.5mm)
Weight:	1.2 oz. (34g), excluding battery
Battery Weight:	0.45 oz. (13g)
Frequency:	315, 433.92, 868.95
Transmitter's ID Code:	24-bit digital word, over 16 million combinations, pulse width modulation
Overall Message Length:	36 bits
Alarm Inputs:	2: one internal, one external, each with a separate 24-bit transmitter
Auxiliary Input Circuit Type:	N.C. / E.O.L., selected with DIP switch
E.O.L. Resister Required:	47 kilo ohms
Message Repetition:	Once every 3 minutes or one-shot, selectable via on-board DIP switch
Supervision:	Signaling at 60-minute intervals via reed switch or aux. input, including battery supervision
Tamper Reporting:	Every 3 minutes until restored
Power Source:	3V Lithium CR-2-type battery, Panasonic or Sanyo only (not included)
Battery Life Expectancy:	3 years (typical use)
Operating Temperature:	32° F to 120° F (0° C to 49° C)
Standards:	FCC compliant

• Magnetic Door/Window Contact
  
• Battery
  
• Instructions